Several connections at once

Got a problem with Viscosity or need help? Ask here!


Posts: 8
Joined: Fri Jul 17, 2009 8:08 pm

Post by AlexK » Fri Jul 17, 2009 8:12 pm
I noticed that Viscosity allows me to connect to several VPN connections at once. What is the benefit of that and what are the disadvantages? Why would I use such a setup and how does the OS know which connection to use?


User avatar
Posts: 2083
Joined: Thu Sep 04, 2008 9:27 pm

Post by James » Mon Jul 20, 2009 12:24 am
Hi Alex,

Mac OS X uses its routing table to determine which VPN connection to send network traffic through. For example, if one of your remote VPN subnets has a route for all 10.0.0.x traffic, and another for 192.168.0.x traffic, Mac OS X will look at these routes and use the correct VPN connection. You can view your computer's routing table by opening the Network Utility application (under /Applications/Utilities/Network, clicking on the Netstat tab, selecting "Display routing table information", and then click the Netstat button. You'll have to wait a few moments, and then your computer's routing table should be displayed.

Of course, you can run into routing conflicts when having multiple connections - it depends on how your connections are setup. And obviously, there can only ever be one default route (where all the traffic goes if there isn't a matching route).

James Bekkema
Viscosity Developer



Posts: 8
Joined: Fri Jul 17, 2009 8:08 pm

Post by AlexK » Fri Aug 07, 2009 12:42 am
Hi James,

thank you for explaining. I see now that I don't really have a use for multiple connections (which is why it didn't make sense to me in the first place).
3 posts Page 1 of 1