Skip to content
Update "Improperly Signed"
Got a problem with Viscosity or need help? Ask here!
- Posts: 1
- Joined: Sun Jul 26, 2009 12:52 pm
Viscosity asked if I wanted to upgrade from 1.0 to 1.0.5 and I said sure. But after the package downloaded, it says "The update is improperly signed" and the update is canceled. Any idea what's up?
Hi designAgitator,
Unfortunately this is caused by a bug in version 1.0, however it will not affect versions 1.0.1 and above. If you're still using version 1.0, you'll need to update to the latest version manually (from then on all automatic updates will work). You can find instructions for updating Viscosity manually here.
Cheers,
James
Unfortunately this is caused by a bug in version 1.0, however it will not affect versions 1.0.1 and above. If you're still using version 1.0, you'll need to update to the latest version manually (from then on all automatic updates will work). You can find instructions for updating Viscosity manually here.
Cheers,
James
Web: https://www.sparklabs.com
Support: https://www.sparklabs.com/support
Twitter: https://twitter.com/sparklabs
Support: https://www.sparklabs.com/support
Twitter: https://twitter.com/sparklabs
2 posts
Page 1 of 1