Dreamweaver

Got a problem with Viscosity or need help? Ask here!

emgpoductions

Posts: 1
Joined: Sat Sep 12, 2009 4:04 am

Post by emgpoductions » Sat Sep 12, 2009 4:09 am
I have successfully established a connection via Viscosity VPN but Dreamweaver will not connect to the server. Safari will also not connect and I cannot ping the server IP address.

Anyone have an idea what I am doing wrong? Thanks so much for any help!

James

User avatar
Posts: 1918
Joined: Thu Sep 04, 2008 9:27 pm

Post by James » Wed Sep 16, 2009 3:32 am
Hi emgpoductions,

It sounds like the routes for your connection are not setup correctly. Typically you won't need to worry about these from Viscosity's end - they should be being pushed out by your OpenVPN server. If you are running your own OpenVPN server, check that you are pushing out the correct routes, and that you have correctly setup NAT and/or bridging so connected clients can reach the full network.

Cheers,
James
James Bekkema
Viscosity Developer

Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs
2 posts Page 1 of 1