Skip to content
Dreamweaver
Got a problem with Viscosity or need help? Ask here!
- Posts: 1
- Joined: Sat Sep 12, 2009 4:04 am
I have successfully established a connection via Viscosity VPN but Dreamweaver will not connect to the server. Safari will also not connect and I cannot ping the server IP address.
Anyone have an idea what I am doing wrong? Thanks so much for any help!
Anyone have an idea what I am doing wrong? Thanks so much for any help!
Hi emgpoductions,
It sounds like the routes for your connection are not setup correctly. Typically you won't need to worry about these from Viscosity's end - they should be being pushed out by your OpenVPN server. If you are running your own OpenVPN server, check that you are pushing out the correct routes, and that you have correctly setup NAT and/or bridging so connected clients can reach the full network.
Cheers,
James
It sounds like the routes for your connection are not setup correctly. Typically you won't need to worry about these from Viscosity's end - they should be being pushed out by your OpenVPN server. If you are running your own OpenVPN server, check that you are pushing out the correct routes, and that you have correctly setup NAT and/or bridging so connected clients can reach the full network.
Cheers,
James
Web: https://www.sparklabs.com
Support: https://www.sparklabs.com/support
Twitter: https://twitter.com/sparklabs
Support: https://www.sparklabs.com/support
Twitter: https://twitter.com/sparklabs
2 posts
Page 1 of 1