Page 1 of 1


Posted: Sat Sep 12, 2009 4:09 am
by emgpoductions
I have successfully established a connection via Viscosity VPN but Dreamweaver will not connect to the server. Safari will also not connect and I cannot ping the server IP address.

Anyone have an idea what I am doing wrong? Thanks so much for any help!

Re: Dreamweaver

Posted: Wed Sep 16, 2009 3:32 am
by James
Hi emgpoductions,

It sounds like the routes for your connection are not setup correctly. Typically you won't need to worry about these from Viscosity's end - they should be being pushed out by your OpenVPN server. If you are running your own OpenVPN server, check that you are pushing out the correct routes, and that you have correctly setup NAT and/or bridging so connected clients can reach the full network.