Again Snow Leopard 10.6.1

Got a problem with Viscosity or need help? Ask here!

fred

Posts: 5
Joined: Thu Sep 10, 2009 10:24 pm

Post by fred » Mon Sep 14, 2009 8:07 pm
I'm always trying to use Viscosity 1.0.5 and it seems to start correctly, in fact i'm able to use vpn services for about 10 seconds when my route table is like that:

Routing tables

Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.250.254 UGSc 3 0 tap0
default link#7 UCSI 0 0 en4
default link#8 UCSI 0 0 en5
10.9/16 192.168.167.1 UGSc 0 0 en0
10.11/16 192.168.167.1 UGSc 0 0 en0
10.33/16 192.168.167.1 UGSc 0 0 en0
10.37.129/24 link#8 UCS 1 0 en5
10.37.129.2 127.0.0.1 UHS 1 1 lo0
10.37.129.255 link#8 UHLWbI 2 70 en5
10.211.55/24 link#7 UCS 1 0 en4
10.211.55.2 127.0.0.1 UHS 0 1 lo0
10.211.55.255 link#7 UHLWbI 2 70 en4
10.254.152.41/32 192.168.167.1 UGSc 1 0 en0
127 127.0.0.1 UCS 0 0 lo0
127.0.0.1 127.0.0.1 UH 4 1500 lo0
169.254 link#4 UCS 0 0 en0
192.168.167 link#4 UCS 4 0 en0
192.168.167.1 0:0:c:7:ac:64 UHLWI 5 0 en0 1122
192.168.167.50 0:f:fe:34:3d:fd UHLWI 0 0 en0 740
192.168.167.95 0:b:cd:95:be:4f UHLWI 0 819 en0 1119
192.168.167.102 127.0.0.1 UHS 0 2 lo0
192.168.167.255 link#4 UHLWbI 4 80 en0
192.168.250 link#10 UC 1 0 tap0
192.168.250.254 0:ff:88:35:bd:30 UHLWI 4 0 tap0 1199

after that the route table increase abnormally becoming as it follows and the vpn is unreachable:

Routing tables

Internet:
Destination Gateway Flags Refs Use Netif Expire
default 192.168.250.254 UGSc 0 0 tap0
default link#7 UCSI 0 0 en4
default link#8 UCSI 0 0 en5
default link#10 UCSI 17 0 tap0
10.9/16 192.168.167.1 UGSc 0 0 en0
10.11/16 192.168.167.1 UGSc 0 0 en0
10.33/16 192.168.167.1 UGSc 0 0 en0
10.37.129/24 link#8 UCS 1 0 en5
10.37.129.2 127.0.0.1 UHS 1 1 lo0
10.37.129.255 link#8 UHLWbI 2 76 en5
10.211.55/24 link#7 UCS 1 0 en4
10.211.55.2 127.0.0.1 UHS 0 1 lo0
10.211.55.255 link#7 UHLWbI 2 76 en4
10.254.152.41/32 192.168.167.1 UGSc 1 0 en0
64.180.164.123 link#10 UHLWI 0 1 tap0
72.73.174.161 link#10 UHLWI 0 1 tap0
75.178.187.76 link#10 UHLWI 0 1 tap0
82.67.92.123 link#10 UHLWI 0 1 tap0
82.237.179.200 link#10 UHLWI 0 1 tap0
89.207.253.12 link#10 UHLWI 0 1 tap0
90.57.137.220 link#10 UHLWI 0 8 tap0
91.32.104.165 link#10 UHLWI 0 1 tap0
91.85.203.227 link#10 UHLWI 0 1 tap0
91.121.54.42 link#10 UHLWI 0 1 tap0
91.121.139.75 link#10 UHLWI 0 1 tap0
92.122.208.216 link#10 UHLWI 0 1 tap0
98.200.235.145 link#10 UHLWI 0 1 tap0
127 127.0.0.1 UCS 0 0 lo0
127.0.0.1 127.0.0.1 UH 4 1520 lo0
169.254 link#4 UCS 1 0 en0
169.254.213.19 127.0.0.1 UHS 0 1 lo0
169.254.255.255 link#4 UHLW 1 2 en0
192.168.167 link#4 UCS 4 0 en0
192.168.167.1 0:0:c:7:ac:64 UHLWI 5 1 en0 1100
192.168.167.50 0:f:fe:34:3d:fd UHLWI 0 0 en0 718
192.168.167.95 0:b:cd:95:be:4f UHLWI 1 912 en0 1097
192.168.167.102 127.0.0.1 UHS 0 2 lo0
192.168.167.255 link#4 UHLWbI 3 86 en0
192.168.250 link#10 UC 2 0 tap0
192.168.250.254 0:ff:88:35:bd:30 UHLWI 1 0 tap0 1182
192.168.250.255 ff:ff:ff:ff:ff:ff UHLWbI 0 3 tap0
195.84.183.14 link#10 UHLWI 1 12 tap0
208.126.117.4 link#10 UHLWI 0 1 tap0
216.231.47.14 link#10 UHLWI 0 1 tap0
224.0.0.251 1:0:5e:0:0:fb UHmLWI 1 0 tap0

why are there so many tap0 entries and why they seem to mutiply as time go on ??
Any hints ??

Thank you ....

James

User avatar
Posts: 1908
Joined: Thu Sep 04, 2008 9:27 pm

Post by James » Wed Sep 16, 2009 2:59 am
Hi Fred,

The following post may apply to you as well - does following the suggestions in the post resolve the problem?
http://www.viscosityvpn.com/forum/viewt ... p=556#p556

Cheers,
James
James Bekkema
Viscosity Developer

Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs
2 posts Page 1 of 1