Copied vpn connection not connecting

Got a problem with Viscosity or need help? Ask here!

EAJ

Posts: 1
Joined: Wed Aug 21, 2019 1:51 am

Post by EAJ » Wed Aug 21, 2019 1:56 am
I have to temporarily use another laptop to run Viscosity to log into a remove VPN connection. I copied over the relevant files from a recent backup to the relevant locations. But when I try to open the connection, it disconnects immediately. The log shows the following error:

2019-08-20 08:49:23: Connection is reachable. Starting connection attempt.
2019-08-20 08:49:24: Options error: You must define CA file (--ca) or CA path (--capath)
2019-08-20 08:49:24: The OpenVPN subsystem could not be started.
2019-08-20 08:49:24: State changed to Disconnected

I have defined the ca.crt file and other files asked for. I have changed permissions on the files to be rw only for the .crt files, but I am not sure what else I need to do?

James

User avatar
Posts: 1909
Joined: Thu Sep 04, 2008 9:27 pm

Post by James » Wed Aug 21, 2019 4:27 pm
Hi EAJ,

If you are manually copying/moving files into place you'll need to quit and re-opened Viscosity to get it to see the changes.

You may prefer to import the configuration into Viscosity, that way configuration data, files, permissions, etc. will all be correct. To do this open Viscosity's preferences window, click on the "+" button, and select Import Connection->From File. Then select the folder your connection/s are in (i.e. your backed up connections): Viscosity will automatically search the folder and any subfolders for connections and import any it finds.

Cheers,
James
James Bekkema
Viscosity Developer

Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs
2 posts Page 1 of 1