Manual setting local network IP

Got a problem with Viscosity or need help? Ask here!

Sparven

Posts: 3
Joined: Tue Oct 30, 2018 1:26 am

Post by Sparven » Thu Aug 01, 2019 6:26 pm
Hello,

I am tightening up my Windows firewall as i use it as a VPN killswitch for a few select programs including my browser. I am however hitting a dead end. As i enter the scope of local IP-adress for the rule to be applied to, i have to enter the whole 10.0.0.0 - 10.255.255.255 as Viscosity creates a random IP-adress in the Class A range when i connect to my VPN service provider.

Is it possible to force a static internal ip adress when connecting to the VPN service, so i can enter a specific IP in the firewalls scope?

I have tried setting details manually for the adapter, but it had no effect once i connect to VPN.

Eric

User avatar
Posts: 907
Joined: Sun Jan 03, 2010 3:27 am

Post by Eric » Fri Aug 02, 2019 12:59 pm
Hi Sparven,

Your VPN Provider assigns you a local IP and Netmask when you connect, not Viscosity. In the same way connecting to a friends WiFi, their router would assign you an IP and Netmask, not your laptop. You would need to contact your VPN Provider for more information about this - https://sparklabs.com/support/kb/article/how-do-i-find-out-who-my-vpn-provider-is/

Regards,
Eric
Eric Thorpe
Viscosity Developer

Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs

Sparven

Posts: 3
Joined: Tue Oct 30, 2018 1:26 am

Post by Sparven » Fri Aug 02, 2019 5:30 pm
Thank you for your reply @eric

I guess this is something like a Demarc point; Who is responsible for what. You were quite correct. I contacted the VPN provider and they were more then happy to provide what range they use for their various connections. It's all setup now.

With regards,
Erik
3 posts Page 1 of 1