Replay Window

Got a problem with Viscosity or need help? Ask here!

mark143

Posts: 19
Joined: Wed Aug 03, 2011 6:58 am

Post by mark143 » Sat Aug 11, 2018 10:15 am
Eric,

I'm getting this message sporadically. It is prevalent during streaming. It usually stops after buffering has stabilized. Any thoughts on addressing this? It comes with different values

PID_ERR replay-window backtrack occurred [17] [SSL-3] [0_________________00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

So fa what I have done is to enter this in client conf:

replay-window 512 30

It somehow helped minimizing. However. I don't know the optimum values for this. Some article says that latency and large bandwidth may contribute. My average latency is around 150ms with 100Mbps bandwidth using fiber

Eric

User avatar
Posts: 905
Joined: Sun Jan 03, 2010 3:27 am

Post by Eric » Thu Aug 16, 2018 4:05 pm
Hi mark,

This depends on a lot of different things. This is probably a question best asked on the OpenVPN forums or mailing list.

https://sourceforge.net/p/openvpn/mailm ... vpn-users/

Regards,
Eric
Eric Thorpe
Viscosity Developer

Web: http://www.sparklabs.com
Support: http://www.sparklabs.com/support
Twitter: http://twitter.com/sparklabs
2 posts Page 1 of 1