Connection failed when multiple Fallback Server with different protocol.

Got a problem with Viscosity or need help? Ask here!

jme

Posts: 2
Joined: Thu Feb 10, 2022 8:22 pm

Post by jme » Thu Feb 10, 2022 8:41 pm
Hello there,

We have two OpenVPN Instances:

remote server1.example.org 11194 udp4. (ISP A)
remote server2.example.org 11194 tcp4. (ISP B)

When i try to start a Connection with a Fallback remote address (remote server2.example.org 11194 tcp4). Viscosity stops immediately the connection.
Code: Select all
2022-02-10 10:28:00: Viscosity Mac 1.10 (1582)
2022-02-10 10:28:00: Viscosity OpenVPN Engine Started
2022-02-10 10:28:00: Running on macOS 12.2.0
2022-02-10 10:28:00: ---------
2022-02-10 10:28:00: State changed to Connecting
2022-02-10 10:28:00: Checking reachability status of connection...
2022-02-10 10:28:00: Connection is reachable. Starting connection attempt.
2022-02-10 10:28:00: Use --help for more information.
2022-02-10 10:28:00: The OpenVPN subsystem could not be started.
2022-02-10 10:28:00: State changed to disconnected (OpenVPN System Failure)
When I change the protocol for the Fallback Server to udp. Like the first server it will connect successfully.

Any Ideas?
Thank You
Attachments
2022-02-10_10-40.jpeg
2022-02-10_10-40.jpeg (61.89 KiB) Viewed 3457 times

jme

Posts: 2
Joined: Thu Feb 10, 2022 8:22 pm

Post by jme » Thu Feb 10, 2022 10:06 pm
Sorry my fault.

Did not work when
Code: Select all
explicit-exit-notify
is set.
2 posts Page 1 of 1